WhatsApp / WeChat: +86-15965642277

Product range

Construction hoists, mast climbing work platforms and the accessories that keep them running — one supplier, one set of drawings, one spare parts list.

Overview

Three product families, one engineering team

Every JKTECH system shares the same rack and pinion philosophy: a galvanised mast, a geared drive unit, redundant safety devices and controls that a site electrician can understand. Choose the family that matches the job, then configure it to the building.

01 — Hoists Construction hoist car

Construction Hoists

Passenger and material transport in enclosed cars or open platforms, single or twin cage.

  • 1,000 – 3,200 kg payload
  • Up to 200 m lifting height
  • VFD controlled, 0 – 60 m/min
Open product page
02 — Platforms Mast climbing work platform

Mast Climbing Work Platforms

Long decks that climb their own masts — the productive alternative to facade scaffold.

  • Decks up to 30 m long
  • 0.75 / 1.0 / 1.5 m widths
  • Up to 7.5 kN per mast
Open product page
03 — Spares Drive units packed for export

Accessories & Spare Parts

Masts, drive units, safety gear, controls, landing doors, ties and wear parts.

  • Common parts across the range
  • Kits or individual items
  • Documented part references
Open product page
Configurations

Typical JKTECH hoist configurations

The table below shows our most frequently ordered set-ups. Load capacities, cage dimensions, voltages and colours are built to order, so use this as a starting point for your enquiry rather than a fixed catalogue.

Construction hoists — reference configurations
Configuration Payload Cage / platform Typical use
Single cage material hoist 1,000 kg Open platform, 3.2 × 1.5 m Scaffold supply, bricks, mortar, boards
Single cage personnel & material 2,000 kg / 20 persons Enclosed car, 3.2 × 1.5 × 2.3 m Mid-rise building, fit-out trades
Twin cage personnel & material 2 × 2,000 kg Two enclosed cars on one mast High-rise cores, high traffic sites
Heavy duty single cage 2,700 / 3,200 kg Enclosed car, reinforced floor Precast panels, heavy formwork
Long car for bulky loads 2,000 kg Car up to 5.0 m long Pipes, ducts, drywall sheets

All figures are reference values. Final specifications are confirmed on the order drawing.

System thinking

Everything above the foundation is ours

Because we manufacture the mast, the car, the drive unit and the control panel ourselves, the interfaces are already solved. There is no guessing which rack pitch fits which pinion, no waiting on a third-party supplier for a compatible safety device, and no mismatch between the load chart and the equipment on site.

  • Hot-dip galvanised masts with hardened racks
  • Drive units with integrated centrifugal brake and safety gear
  • Control panels with fault display and service hour meter
  • Landing doors, call systems and anchor frames in the same package

Not sure which configuration fits your site?

Send us the building height, the heaviest load and your site power supply. We will size the system for you.